MAGUS
MAGUS CHD40 is a digital HDMI camera with three video interfaces and automatic switching between 4K and Full HD depending on the monitor resolution. The camera uses an HDMI interface to connect to a TV, monitor, or projector directly.
Διαθέσιμο με Προπαραγγελία
Στην περίπτωση αυτή περιλαμβάνονται προϊόντα που συνήθως δεν κρατάμε σε στοκ και για κάποιους λόγους - που δεν εξαρτώνται από την εταιρία μας - ΔΕΝ μπορούν να είναι διαθέσιμα σε διάστημα μικρότερο των 14 ημερών.Στην κατηγορία αυτή περιλαμβάνονται και προϊόντα που προδιαφημίζονται από τους κατασκευαστές αλλά δεν άρχισε ακόμη η επίσημη διανομή τους στην ελληνική αγορά. Πιθανόν για τα είδη αυτά να παρέχεται δυνατότητα προπαραγγελίας με ειδική προνομιακή τιμή. Αν γνωρίζουμε ήδη την πιθανή ημερομηνία άφιξης του συγκεκριμένου προϊόντος, στις αποθήκες μας, τότε αυτή θα αναγράφεται ξεχωριστά και επάνω από την ένδειξη «Διαθέσιμο με Προπαραγγελία»
MAGUS CHD40 DIGITAL CAMERA
Features:
Sensor
The camera is equipped with a SONY Exmor/Starvis backlit color CMOS sensor. This technology increases light sensitivity and improves camera performance in low light conditions.
The 1/1.2" sensor with 2.9x2.9µm pixel size provides light sensitivity of 1028mV with 1/30s. To achieve the maximum field of view without distortion, we recommend using an adapter with a 0.75x to 1x magnification.
Software features
The camera uses software to display images on an external display, take photographs, record video, edit images, and measure linear and angular dimensions of samples and their structures. Before taking measurements, the software must be calibrated for each objective with a calibration slide.
USB3.0 and Wi-Fi interfaces are used for connecting a camera to a PC. There is software that can be installed from the included CD.
Additional devices support
In order to use the built-in software, connect a mouse to the USB port. The mouse control eliminates the vibrations that occur when the user interacts with the camera.
Instead of a mouse, you can install a Wi-Fi adapter into the USB port. It is used for connecting and transferring data to a PC.
Photos and videos are saved to the SD card or the flash stick.
The MAGUS product line features LCD monitors designed to be directly mounted on HDMI cameras. The simultaneous use of the camera and monitor creates a compact and powerful imaging system for any MAGUS microscope.
Installation
The camera is mounted on the microscope in the trinocular tube/camera port using the C-mount adapter (included). To mount the camera in an eyepiece tube instead of an eyepiece, you will need a special C-mount adapter and adapter rings (not included) to fit the tube diameter.
Specifications
In the box: