MAGUS CHD20 DIGITAL CAMERA

MAGUS CHD20 DIGITAL CAMERA

Features:

• The camera operates autonomously without a connection to a PC via HDMI interface. Can be connected to a PC via USB2.0 interface
• The camera resolution is 1920x1080px – an ideal choice for displaying images on a Full HD monitor
• 60fps or 50fps depending on the video output interface for observing moving objects, recording video, and moving the preparation without jerkiness or lags
• SONY Starvis color CMOS backlit sensor provides low noise level and high light sensitivity even in low-light conditions. You will get clearer, brighter, and more color-saturated images.
• Software with photo, video recording, editing, external display functions, linear and angular measurements

Sensor
The camera is equipped with a SONY Starvis backlit color CMOS sensor. This technology increases light sensitivity and improves camera performance in low light conditions.
The 1/2" sensor with 3.75x3.75µm pixel size provides light sensitivity of 1175mV with 1/30s. To achieve the maximum field of view without distortion, we recommend using an adapter with a magnification of 0.5x to 0.7x.

Software features
When connected via HDMI interface, the camera uses built-in software to display images on an external display, take photographs, record video, edit images, and measure linear and angular dimensions of samples and their structures. Before taking measurements, the software must be calibrated for each objective with a calibration slide.
The USB interface is used for connecting a camera to a PC. There is software that can be installed from the included CD.

Additional devices support
In order to use the built-in software, connect a mouse to the USB port. The mouse control eliminates vibrations that occur when the user interacts with the camera.
Photos and videos are saved to the SD card or the flash stick.
The MAGUS product line features LCD monitors designed to be directly mounted on HDMI cameras. The simultaneous use of a camera and monitor creates a compact and powerful imaging system for any MAGUS microscope.

Installation
The camera is mounted on the microscope in the trinocular tube/camera port using the C-mount adapter (included). To mount the camera in an eyepiece tube instead of an eyepiece, you will need a special C-mount adapter and adapter rings (not included) to fit the tube diameter.