LUNT LS100MT/BP&F CONVERSION FOR LS100MT

LUNT LS100MT/BP&F CONVERSION FOR LS100MT

LUNT LS100MT/BP&F CONVERSION FOR LS100MT

LUNT

Transforms the LS100MT into a 3-lens ED Apo for observation & photography of moon, planets & deep-sky
419,00 €

Διαθέσιμο με Προπαραγγελία

Διαθέσιμο με Προπαραγγελία

Στην περίπτωση αυτή περιλαμβάνονται προϊόντα που συνήθως δεν κρατάμε σε στοκ και για κάποιους λόγους - που δεν εξαρτώνται από την εταιρία μας - ΔΕΝ μπορούν να είναι διαθέσιμα σε διάστημα μικρότερο των 14 ημερών.Στην κατηγορία αυτή περιλαμβάνονται και προϊόντα που προδιαφημίζονται από τους κατασκευαστές αλλά δεν άρχισε ακόμη η επίσημη διανομή τους στην ελληνική αγορά. Πιθανόν για τα είδη αυτά να παρέχεται δυνατότητα προπαραγγελίας με ειδική προνομιακή τιμή. Αν γνωρίζουμε ήδη την πιθανή ημερομηνία άφιξης του συγκεκριμένου προϊόντος, στις αποθήκες μας, τότε αυτή θα αναγράφεται ξεχωριστά και επάνω από την ένδειξη «Διαθέσιμο με Προπαραγγελία»

Διαθεσιμότητα: Σε απόθεμα
SKU
OPT-0551430

LUNT LS100MTBP&F Conversion Kit for LS100MT


The LS100MT solar telescopes can be upgraded with this optional conversion kit. This allows the telescopes to be used as 3-lens ED apochromatic refractor for observation and photography of the starry night sky.

The H-Alpha system of the LS100MT telescopes can be easily replaced by this conversion kit. The conversion kit offers a very high quality and solid R&P focuser. Even the heaviest cameras or other accessories will be hold without any problems and can be focused sensitively by the integrated 10:1 reduction.

Simply loosen three knurled screws holding the H-Alpha unit including the focuser at the LS100MT. Attach here the new focuser, and your LS100MT is transformed into a full 3-lens apochromatic telescope. The new focuser offers 95mm focusing way with backlash- and tilt-free mechanics also when using heavy accessories. A 2 inch ring-clamp is directly at the focuser, and an adapter to 1.25 inch also with ring-clamp is included in delivery.

But this is not all: With this conversion kit Herschel-wedges or Ca-K modules can be used at the LS100MT telescopes for solar observation. This makes it possible to observe the sun in H-alpha, in Calcium-K wavelength light, or in White-Light - with one and the same telescope!

This conversion kit turns the LS100MT into a real all-round telescope!

FEATURES
  • Backlash- and tilt-free mechanics
  • 95mm focusing way
  • 10:1 reduction
  • 2 inch and 1.25 inch ring clamping

Technical Data

FIELD OF APPLICATION
Field of application Solar observation
Deep Sky Observation
Deep Sky Photography
Lunar observation
Lunar photography
Planetary observation
Planetary photography
OPTICAL SPECIFICATIONS
Mirror/Lens diam. 100 mm
Focal length 714 mm
Aperture ratio 7.1
Angular resolution 1.4 arc seconds
Full width at half maximum (Angström), less then 0.7
GENERAL TECHNICAL DATA
Eyepiece Barrel Diameter 50.8 mm
DIMENSIONS & WEIGHTS
Total length 23 cm
Total width 15 cm
Total height 12 cm
SCOPE OF DELIVERY
  • High quality 2 inch focuser with adapter to LS100MT telescopes
  • Adapter from 2 inch to 1.25 inch
  • Instruction manual
LS100MT telescope not included! Can only be used together with a LS100MT solar telescope. This conversion kit is absolutely necessary if a LS100MT telescope should be used for night sky observation.
Γράψτε τη Δική σας Αξιολόγηση
Μόνο οι εγγεγραμένοι χρήστες μπορούν να γράψουν αξιολογήσεις. Παρακαλώ, συνδεθείτε ή δημιουργήστε ένα λογαριασμό
Σχετικά Προϊόντα: