L-500 Direct Drive Mount

L-500 Direct Drive Mount

L-500 Direct Drive Mount

PLANEWAVE

The L-Series combines versatility, simplicity and affordability by combining all the technology of our Observatory class telescopes into a compact stand-alone mount

Διαθέσιμο, συνήθως σε 5-14 μέρες

Διαθέσιμο, συνήθως σε 5-14 μέρες
Στην περίπτωση αυτή περιλαμβάνονται προϊόντα που δεν κρατάμε σε στοκ αλλά διατίθενται μόνο κατόπιν παραγγελίας ή έχει προαναγγελθεί η κυκλοφορία τους στην αγορά από τον κατασκευαστή. Για παραγγελίες στα είδη αυτά απαιτείται προκαταβολή, ανάλογη με τη συνολική αξία της παραγγελίας σας.. Μόλις λάβουμε την παραγγελία σας, θα σας ειδοποιήσουμε με e-mail ή τηλεφωνικά, για τον ακριβή χρόνο παράδοσης και το ύψος της προκαταβολής.
Διαθεσιμότητα: Σε απόθεμα
SKU
BA-1321100


L-500 Direct Drive Mount
Alt-Az / Equatorial Direct Drive Mount


The L-Series combines versatility, simplicity and affordability by combining all the technology of our Observatory class telescopes into a compact stand-alone mount.


L-350 is designed for the CDK14 and CDK 12,5 can hold payload of over 100 lbs.
L-500 is designed for the CDK17 and CDK20 and can hold payload of over 200 lbs.
L-600 is ideal for the CDK24 and can hold up to 300 lbs.
The mount is equipped with direct drives motors as well as high-resolution encorders. The software is ASCOM compatible and the direct drive motors can move the telescope at incredible speeds for tracking satellites.


In its Alt/Az configuration it is considerably more compact than its equatorial counterpart, allowing a larger telescope to fit in a smaller enclosure. The mass it takes to make a rigid alt/az mount is substantially less, leading to cost savings. Unlike German Equatorial mounts, there are no meridian flips to deal with, and no  large protruding counterweights to create a dangerous hazard in a public observatory. Alt/Az is more intuitive to use and no polar alignment is needed.

  • new Alt-Az L-Serie Direct Drive Mounts by PlaneWave for CDK17/20
  • L-500 can hold payload of over 200 lbs, for CDK17/20
  • Zero Backlash, Zero Periodic Error
  • with integrated high resolution encoders
  • incredible slew speed up to 50 degrees per second
  • through the mount cabling


ΣΗΜΑΝΤΙΚΟ:

Για την αποστολή του τηλεσκοπίου, απαιτείται η μεταφορά του από το εξωτερικό, με έξτρα κόστος ειδικής συσκευασίας και μεταφορικών. Τα κόστη αυτά αφορούν την μεταφορά του τηλεσκοπίου από το εξωτερικό στην Ελλάδα και είναι ανεξάρτητα από το κόστος μεταφορικών εντός Ελλάδας. Παρακαλούμε, επικοινωνήστε μαζί μας για το συνολικό κόστος.

 

Τεχνικά Χαρακτηριστικά
Καθ.Βάρος (γρ.) 100000

SPECIFICATIONS - MOUNT 

  • Mount: Alt-Az or Equatorial configuration
  • Payload Capacity (kg): 200 lbs (91 kg)
  • Latitude Range: 0 to 90 degrees, Northern and Southern hemispheres
  • Slew Speeds: 20 degrees per second (standard); 50 degrees per second (maximum), both axes
  • Tracking accuracy: < .3 arcsecond error over 5 minute period
  • Pointing Precision: 2 arcseconds
  • All-sky pointing accuracy: <10 arcsecond RMS with PointXP Model
  • System Natural Frequency: 10 Hz or greater
  • Control system electronics: PlaneWave Interface dual axis telescope control
  • Software: PlaneWave Interface (PWI4). Incorporates PointXP mount modeling software by Dave Rowe All ASCOM compatible
  • Homing Sensors: Home position sensors are included allowing the mount can find its home position on power up.


SPECIFICATIONS - ELECTRONICS

  • Motor: Azimuth and Altitude: Direct Drive 3 Phase Axial-Flux Torque Motors
  • Motor Torque: Approximately 20 ft-lbs continuous; 50 ft-lbs peak
  • Motor Control: Industrial grade brushless motor control system and built in electronics
  • Encoder: 152mm disk built into the azimuth and altitude axes with stainless steel encoder on the circumference with reader yields 18,880,000 counts per revolution of the telescope. This translates to about 0.069 arcsecond resolution
  • Power Requirements: Accepts 120 VAC. Supplied with 12VDC 15A Regulated Power Adapter


SCOPE OF DELIVERY

  • Hardware - Six 3/8-16 x ¼ “socket head cap screws to bolt the mount to the pier, or wedge. - Six 3/8-16 x ¼” washers. - One extended length shoulder bolt for RA axis to EQ wedge alignmen.
  • Planewave Saddle – wide saddle comes standard with L-500 or L-600 mounts for securing CDK17, CDK20, or CDK24 OTAs. Can do EZ-Saddle at customer request.
  • One 16’ USB cable – to connect the mount to the observatory control computer
  • One 120VAC power cable – To provide to the mount
  • Standard Allen Key set – For tightening bolts used on the mount
  • Flash drive – Contains PWI4 software for mount control and instructions for installation
Γράψτε τη Δική σας Αξιολόγηση
Μόνο οι εγγεγραμένοι χρήστες μπορούν να γράψουν αξιολογήσεις. Παρακαλώ, συνδεθείτε ή δημιουργήστε ένα λογαριασμό
Σχετικά Προϊόντα: