Ermenrich PLUS LN15 Laser Level

Ermenrich PLUS LN15 Laser Level

Features:

• Green beams are more visible and can be seen from a greater distance compared to red beams
• 5 lines: 360° sweep in the horizontal plane and one line in the vertical plane
• Pulse mode for work with a laser receiver (purchased separately)
• Beam brightness adjustment, tilt mode, compensator lock function
• Self-leveling system: light alarm goes off when the device tilts more than 4°
• Powered by standard batteries, IP54 protection against dust and water, protection against falls
• Standard 1/4" thread

The Ermenrich PLUS LN15 Laser Level creates five lines in two planes. The horizontal sweep is 360°, which gives four lines, and one line is created in the vertical plane. This type of beam projection is convenient for both home use and professional construction tasks. A level with five beams is handy for marking sockets and switches, installing door and window openings, pouring floors, gluing wallpaper, and room decor.

The green laser is clearly visible in both the dark and bright daylight. This allows the level to be used not only indoors but also at open construction sites. The beam visibility range under normal conditions is 30 meters; for work in difficult conditions, the device can be supplemented with a laser receiver (not included). To work with the receiver, the level switches to pulse mode.

Another useful feature of this device is the self-leveling system. If the level is not properly secured and accidentally tilts more than 4 degrees during use, the lines will start to flicker, notifying you to align the device. The level can also be switched to the inclined line mode. In this mode, the compensator is locked and light notifications are turned off. The inclined mode can be useful when constructing stairs or ramps.

The device can be installed on any 1/4" standard mount. Protection against water, dust, and falls makes it easier to work with the device on a construction site. The device is powered by standard batteries. Depending on the selected brightness level, the device can operate from 8 to 15 hours without replacing the batteries.

With DűhrerSN technology. This technology provides stable laser power and good beam visibility for measurements in various lighting conditions.