Adaptors - Rings

The adapter allows for connecting 1.25" accessories, like photo adapters or eyepieces, to the T2-thread and provides ver...

Adapter with M68i x1 to M74i x1 female threads, to adapt M68 parts to focusers with M74 x 1 male thread...

The adapter allows the connection of M54x0.75 accessories like M54 filter drawers or M68 OAG and 2" filter wheels to ZWO...

The M48 sensor tilt plate is independently developed by ZWO and specially made to match telescope with M48 thread. The t...

Baader's 2"/1.25" reducer permits you convert your 2" focuser for use with 1.25" eyepieces and accessories...

Converts an AP 2.7” female thread to an M68 x1 female thread...

The adapter TSM5475-T2 provides a very short interface to the photo thread T2 for all adapters, cameras and focusers wit...

Reducing piece: M68a to M48a for direct connection of M48 accessories to the M68 system...

Use your high-quality Canon EOS, EF or EF-S lens also with your CCD camera for first-class deep-sky images...

This adaptor is necessary to attach the QHY Polemaster to a telescope mount...

TS projection adapter for 1.25" eyepieces - Telescope connection: 1.25" nosepiece...

The focal adapter is suitable for all telescopes with a male M63x1 thread at the focuser. It is used for the direct visi...

The adapter allows connecting Skywatcher focal reducers and correctors to telescopes with 2" receptacle...

The Baader VariLock T2 extension tubes are two continuously adjustable extension rings in the T2 system. The extension t...

Mainly used to reduce newton ring when imaging ha-solar. Also used to adjust the camera imaging plane by rotating the si...

The Baader VariLock T2 extension tubes are two continuously adjustable extension rings in the T2 system. The extension t...

Can be used to Celestron Edge C 9.25 in combination with Celestron’s focal reducer only. Focal reducer has to be mounted...

Prodigy Microfocuser Telescope Adapter for GSO RC 8''...

The Baader ClickLock (1¼" / 2") is a precisely fitting, very massive eyepiece clamp without clamping screws (!)...

Attach the cooled camera to a photo tripod or mount the camera parallel to the telescope with our optional dovetail clam...