DOVETAIL 75mm FOR C8, C9 ¼, 47cm

DOVETAIL 75mm FOR C8, C9 ¼, 47cm

DOVETAIL 75mm FOR C8, C9 ¼, 47cm

BAADER PLANETARIUM

The dovetail rail has pre-drilled holes for C8, C9.25 and C11 Celestron Schmidt-Cassegrain. It is of course also possible to connect a different telescope with a pair of tube rings.

€114.00

Available Upon Request

Available Upon Request

This category includes products which are not kept in stock and for some reasons -which don’t depend on our company- can’t be available in less than 14 days. Specifically, this category includes new products thar are pre-advertised by manufacturers, however they are not available in Greece yet. You can pre-order these items with a special preferential price. If the estimated arrival date of this product is already known, then the estimated date will be written above the indication “AVAILABLE UPON REQUEST”.

Availability: In stock
SKU
BA-1501615
DOVETAIL 75mm FOR C8, C9 ¼, 47cm


Baader Dovetail Bar L style

The dovetail bar is the link between the telescope and the mount. The bar should be stiff, but not unnecessarily heavy. Due to the profile construction, these Baader dovetails are just as stable as bars made of solid material, only much lighter.

The 3" or "Losmandy" dovetail format has been designed by Losmandy for larger mounts and is now in common usage among many different manufacturers.


Compatible telescopes

The dovetail rail has pre-drilled holes for C8, C9.25 and C11 Celestron Schmidt-Cassegrain. It is of course also possible to connect a different telescope with a pair of tube rings.


Top side with profile

A special feature of the Baader bars is the upper side, which is designed for different radii. So you can mount tube rings with flat support as well as tubes with different diameters. The bar always rests fully on the tube via two edges. This allows you to attach optical tubes to mounts without tube rings.


Parallel photography or tube weights for your telescope

The dovetail bar can also be used as a base for a camera mount that can be mounted on a saddle or for barrel weights on your telescope. All you have to do is drill two holes in your tube and you´re ready to mount the bar. The bar then fits dovetail clamps for a camera (parallel photography), a guide tube or a set of barrel weights for an exact balance.


Suitable for the following mountings:

  • Losmandy GM8, G11 and AZ8
  • Skywatcher (N)EQ6, EQ6-R, AZ-EQ6, EQ8
  • 10 Micron GM1000 and GM2000/3000/4000 with 3" saddle plate
  • Software Bisque Paramount ME II, MX+, MyT
  • Astro-Physics with 3" saddle plate
  • Celestron CGEM II, CGX and CGX-L
  • iOptron CEM 40, CEM 60, CEM 120 and AZ Mount Pro
  • Avalon Linear and M-Uno
  • Meade LX850
  • TrackTheStar TTS-160 Panther
More Information
Net Weight (g) 950
  • Bar system: Losmandy style
  • Length: 470 mm
  • Diameter at the lower base: 3" (76 mm)
  • Holes: Pre-drilled for Celestron 8, C9.25 and C11
  • Thread: 2x 1/4" photo thread (female thread)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account